10
Preparing hot beverages
10.1 Manual dispensing of hot water
Place the jug under the hot water nozzle (2);
turn the tap knob (1): counterclockwise: the
hot water coming out of the nozzle (2) will be
proportional to the opening of the tap;
to interrupt the hot water dispensing turn the
knob counter-clockwise (1) .
10.2 Automatic hot water delivery
Programming
Place the programming lever (4) in the ON posi-
tion. It is located under the front right-hand panel
of the body (in some versions to start operating
it will be sufficient to maintain the PROG/STOP
(5) key pressed for 5 seconds or to turn the pro-
gramming key);
put the cup under the hot water spout (2);
press the PROG/STOP key (5) and all dose key
LED will come on;
press the hot water delivery key (3) ;
when the desired dose has been attained, con-
firm by pressing the PROG/STOP key (5) ;
upon completion of programming, place the
(4)
programming lever
User manual
1
2
back in the OFF position.
Dispensing hot water
put the cup under the hot water spout (2);
press the hot water key (3): wait for the delivery
of water;
to stop delivery in advance, press the hot water
delivery key (3) again or press the STOP key.
Do not touch the hot water nozzle: contact with
!
the nozzle or the steam may be harmful
to people, animals or property.
10.3 Dispensing steam
Immerge the steam-dispensing nozzle (7) in the
liquid to heat;
turn the tap knob (6) counterclockwise: the
steam coming out of the nozzle (7) will be pro-
portional to the opening of the tap;
to interrupt the steam dispensing turn the knob
counter-clockwise (6) .
7
8
3
5
4
6
43