Scheduled Dispensing Group Wash; Arbitrary Dispensing Group Wash; Cleaning The Group Shower Screen, Shower Screen Containment Ring And Filter Holder - Wega URBAN EVDP Manual

8.8.4

Scheduled dispensing group wash

If provided, the machine automatically requests that the dis-
pensing groups be washed on a daily basis.
To begin the wash cycle, proceed as shown on the display.
HOWEVER you can also cancel the wash prompt and resume
normal operation.

Arbitrary dispensing group wash

8.8.5
If desired, it is possible to wash the groups at any time, pro-
ceeding as follows:
• Access the menu (see para. 7.1 on page 47).
• Select the configuration button
• Press the button.
• Select the dispensing group.
• The display will indicate the date of the last wash cycle
and the number of wash cycles.
• To start the wash, press the
USER manual
• Insert a suitable detergent in the blind filter holder, secure
it to the dispensing group and press the
• Wait for wash cycle to finish, then remove the filter holder
from the dispensing group and press the
.
• When the rinse cycle has finished, remove the filter holder
from the dispensing group and press the
off; to resume the washes automatically, turn the machine
on again.
8.8.6
Daily
Clean the dispensing group and filter holder shower screens
with the supplied brush on a daily basis.
button.
Thoroughly clean the inside of the coupling ring and filter
holder, as well as the edge and the wings of the filter holder,
so as to eliminate any accumulated coffee residues.
During the washing phase, all the coffee selections
of that group are disabled.
Washes are interrupted if the machine is switched
Cleaning the group shower screen,
shower screen containment ring
and filter holder
Use the special brush supplied (see the Spare Parts
Catalogue).
URBAN
button.
button.
button.
57 204
of