Sony MVS-8000SF User Manual page 1140

6
7
8
1140
Serial Port Settings (Serial Port Assign Menu)
Variable Length: Use variable-length file names. (The file name is
limited to 23 characters.)
In the <TC Sense> group, select the type of timecode sensing.
Zero based: Mode in which timecode is detected taking the first frame of
the recalled file as 00:00:00:00
SOM based: Mode in which timecode saved in the recalled file is detected
Notes
The details of the above operation modes depend on the connected device.
For more information, consult the documentation for the connected device.
When using a disk recorder that does not support the timecode drop frame
bit, in the <Frame Control Mode> group, select the drop frame mode or
non-drop frame mode.
Drop Frame: Drop frame mode.
Non Drop Frame: Non-drop frame mode.
Notes
This setting is only valid when the system field frequency is one of the
following values.
29.97, 30, 59.94, 60
Using any of the following methods, specify the item to which the video
port number or response speed setting applies.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Item No
a) 1. Video Port: Number of the video port associated with the serial port to which the setting
applies
For a player, the output port setting
For a recorder, the input port setting
2. Maximum Open Delay: maximum time required to open a file
3. Maximum Cueup Delay: maximum time required to cue up a file
4. Play After Cueup Delay: delay time from the cued-up state to begin playback
5. Stop Delay: delay time from issuing the stop command until actually stopping
6. Still Delay: delay time from issuing the still command until actually stopping
7. Continue Delay: delay time from issuing the continue command until actually stopping
8. Idle Delay: delay time from unloading a file until entering the idle state
(The idle state is a state wherein a file has been unloaded but a new file has not been
loaded yet, that is, a state wherein no file is loaded.)
Adjustment Setting values
Item selection
DDR VDCP Setting menu:1 to 8
Simple VDCP Setting menu:1 to 9
a)
a)