Sony MVS-8000SF User Manual page 1081

Setting the format converter outputs (only when using the MVS-
8000G)
To set the format converter
Display the Switcher >Output >FC Adjust menu. The subsequent operations
are the same as for the format converter input settings, except that you can not
disable the format converter settings.
For details of the operations, see "Selecting the Format Converter Conversion
(When Using the MVS-8000G)" (page 1069).
To copy format converter output data
1
In the Switcher >Output >FC Adjust menu, press [Copy].
The Copy/Swap >Copy >Format Converter menu appears.
2
In the <Data Select> group, press [Output].
3
Use the same operations as in steps 3 and 4 of "Copying format converter
input data" (page 1075) to copy the data.
Assigning a PGM/PST bank output signal to the format converter
outputs (1, 2) (only when using simple P/P software on the MVS-
8000G)
1
Display the Switcher >Output >FC Output Assign menu.
2
In the <FC Output1-2 Assign> group, select [Out 17-22].
Signal Output Settings (Output Menu)
1081