Parameter File Requirements For Servopacks For Linear Motors - YASKAWA SGDV-OFB03A Product Manual

Sigma-5 and Sigma-7 Series SERVOPACKs

9.4 Parameter File Requirements for SERVOPACKs for Linear Motors

| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
If a third-party motor is to be operated, a configuration file has to be created by
YASKAWA. To create this file, provide YASKAWA with the following information: motor
data sheet containing all information shown in table below, encoder data sheet containing
all information shown in Parameter File Requirements for Encoders and a sample motor/
encoder combination for checking the overload characteristics. Send this information to
YASKAWA Europe Headquarters, whose address can be found on the last cover page.
Customer: ____________________
Date: ____________________
Motor type: ____________________
Motor supplier: ____________________
Motor serial number: ____________________
Encoder type: ____________________
Please include complete original manufacturer's motor and encoder data
sheets.
Motor Data
Motor Voltage
Rated Power
Magnet Pitch
Rated Force
Maximum Force
Rated Current
Maximum Current
Electromotive Force (BEMF Constant) (*1)
Rated Velocity
Maximum Velocity
Moving Coil Mass
Winding Resistance (*1)
Winding Inductance (*1)
*1: please indicate "line to line" or "line to neutral".
The following table is to be filled by Yaskawa.
Motor Data
Over Speed Detection Level
Base Torque for Overload Detection
Overload Detection Torque 1
Overload Detection Time 1
Motor and Encoder / Scale Configuration
Parameter File Requirements for SERVOPACKs for Linear Motors
Value
Value
Units
V
W
-
N
N
Arms
Arms
mVrms/rpm
m/s
m/s
-2
10 kg
Ohm
mH
Units
%
%
%
s
51