YASKAWA SGDV-OFB03A Product Manual page 18

General
Compliance with UL Standards, EU Directives, and Other Safety Standards
18
Product Model
n SGM7M
n SGM7J
n SGM7A
n SGM7P
n SGM7G
Direct Drive n SGM7E
Servomotors
n SGM7F
n SGMCV
n SGMCS
-B,
-C,
-D, and
-E
(Small-
Capacity,
Coreless
Servomo-
tors)
Linear Servo-
SGLG
n
motors
n SGLF
n SGLF2
n SGLT
*1. Only models with "-E" at the end of model numbers are in compliance
with the standards. Estimates are available for those models. Contact
your Yaskawa representative for details.
*2. For Moving Coils, only models with "-E" at the end of model numbers
are in compliance with the standards.
– We declared the CE Marking based on the harmonized standards in
the above table.
– These products are for industrial use. In home environments, these
products may cause electromagnetic interference and additional
noise reduction measures may be necessary.
– Because SERVOPACKs and servomotors are built into machines,
certification is required after installation in the final product.
– Applicable when the Feedback Option Module is attached to SERVO-
PACKs for the command option attachable type.
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
Sigma-5 and Sigma-7 Series SERVOPACKs
EU Directive
EMC Directive
2014/30/EU
Low Voltage Direc-
tive 2014/35/EU
RoHS Directive
2011/65/EU
EMC Directive
2014/30/EU
Low Voltage Direc-
tive 2014/35/EU
RoHS Directive
2011/65/EU
*1
EMC Directive
*2
2014/30/EU
*2
*2
Low Voltage Direc-
tive 2014/35/EU
RoHS Directive
2011/65/EU
Harmonized Standards
EN 55011 group 1, class A
EN 61000-6-2
EN 61000-6-4
EN 61800-3 (Category C2,
Second environment)
EN 60034-1
EN 60034-5
EN 50581
EN 55011 group 1, class A
EN 61000-6-2
EN 61000-6-4
EN 61800-3 (Category C2,
Second environment)
EN 60034-1
EN 60034-5
EN 50581
EN 55011 group 1, class A
EN 61000-6-2
EN 61000-6-4
EN 61800-3 (Category C2,
Second environment)
EN 60034-1
EN 50581