YASKAWA SGDV-OFB03A Product Manual page 38

Hardware Installation
Mounting the Feedback Option Module
38
1. Fit the mounting rail (G) into the recess on the SERVOPACK (I), and fix the rail with
the mounting screws (H). (Tightening torque: 0.14 Nm).
H
G
I
Back
2. Remove the connector cover from the SERVOPACK.
3. Hold both ends of the board (A) as shown in the illustration, and firmly insert the
board connector into the connector port on the SERVOPACK.
Insert the board
connector firmly into
the connector port.
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
Sigma-5 and Sigma-7 Series SERVOPACKs
H
Top
G - Mounting plate
H - Mounting screws
I -SERVOPACK
Connector cover
A
A - Board
H
I
G
H
G-Mounting rail
H-Mounting screws
I-Sigma-7 400 V SERVOPACK
A
Insert the board
connector firmly into
the connector port.