Conduct In The Event Of Danger And Accidents; Signs - YASKAWA SGDV-OFB03A Product Manual

Sigma-5 and Sigma-7 Series SERVOPACKs
2.11

Conduct in the Event of Danger and Accidents

Preventive Measures
In Case of Emergency: Act
Properly
2.12

Signs

Electric Current
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
WARNING!
Risk of injury from conductive contaminants!
No conductive contaminants may appear during operation.
Therefore, before installing and commissioning the system, check that
contamination level 2 is not exceeded (this can also be done by optical
inspections, if necessary).
n Always be prepared for accidents or fire!
n Keep first aid equipment (first-aid box, blankets, etc.) and fire extinguishers on hand!
n Instruct personnel in accident reporting, first aid and rescue equipment.
n Put the feedback module out of operation immediately:
– Always immediately EMERGENCY-OFF at electrical hazards like short-circuits,
smoke, fire, lightning.
– At mechanical hazards, if necessary EMERGENCY-STOP until the machine
stops. Additionally, EMERGENCY-OFF.
n Keep people out of the danger zone.
n Introduce first aid measures.
n Inform the supervisors at the site.
Notify a doctor and/or fire department.
n
Clear access routes for rescue vehicles.
n
The following symbols and notification signs are found in the work area. They relate to
their immediate installation environment.
WARNING!
Injury hazard due to illegible symbols!
In the course of time, stickers and symbols on the feedback module can
become dirty or otherwise illegible.
Therefore, keep all safety, warning and operating signs on the feedback
module in a clearly legible condition at all times.
Only qualified personnel may work in work spaces with this marking.
Unauthorized persons may not touch work equipment bearing this marking.
Safety Precautions
Signs
25