Disposal; Safety Precautions; Safety Regulations; Requirements On The Personnel Conducting The Work - YASKAWA SGDV-OFB03A Product Manual

Disposal

Recycling Collection Center/Offices

17 Disposal
17.1 Disposal
17.2

Safety Precautions

Disposal Precautions
17.3

Safety Regulations

17.4

Requirements on the Personnel Conducting the Work

17.5

Disposal Instructions

Prerequisites
Electronic Scrap
Plastic
17.6 Recycling Collection Center/Offices
112
This chapter describes the proper and safe disposal of the feedback module.
When disposing of the product, local ordinances and national laws must be observed.
Implement all labeling and warnings as a final product as required.
The disposal may only be conducted in compliance with the safety regulations. Observe
special local regulations, if applicable. If you are not able to conduct the disposal, hire a
suitable waste removal company to do so.
The qualified professional in electrical drive technology and motion applications who is
assigned to carry out the disposal must have the knowledge and training which is neces-
sary to perform this work properly. He must be able to understand and use the safety
instructions attached to the device and its components as well as the connections.
n The feedback module has already been disassembled properly, see
assembly and Storage' page 109.
n Before disposing of the product, destroy its functionality.
n Electronic scrap (circuit boards), which cannot be disassembled, must be disposed of
as special waste. Observe the applicable regulations in doing so.
The marking of the product with the crossed-out wheeled bin symbol means that the
product should be sent to the recycling system at the end of its life. You should dis-
pose of it separately at an appropriate collection point and not put it in the normal
waste stream.
n The module cover is made of plastic. Plastic must be put into the cycle of potential
recyclables for plastics.
Make sure that the disposal is carried out in compliance with your company's disposal
guidelines as well as those of the competent recycling collection centers and offices. In
the event of uncertainty, contact the industrial inspectorate, who is responsible for your
company or the environmental agency.
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
Sigma-5 and Sigma-7 Series SERVOPACKs
Ä Chap. 16 'Dis-