YASKAWA SGDV-OFB03A Product Manual page 39

Sigma-5 and Sigma-7 Series SERVOPACKs
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
4. Fix the board on the SERVOPACK with four screws. (Tightening torque: 0.14 Nm)
C
B -Mounting
screws
with
spacers (2)
B
C -Mounting
screws (2)
5. Align the front end of the module cover (L) with the front panel of the SERVOPACK
as shown in the illustration, and place the module cover so that you can view the
installed board from the opening (where the front cover is removed) on the module
cover.
Front panel
6. Fix the module cover to the SERVOPACK by pushing in the retention clips on the
left and right side of the module cover, while directing their angled end protrusions
to enter the SERVOPACK.
Retention clip
C
B
Fit the spacers
(included in the
delivery) under
the board.
L
Bottom
I
Top
L - Module cover
I - SERVOPACK
Retention clip angled
end protrusion
Push the clips in the
direction indicated
by the arrow so the
clip will go into the
SERVOPACK.
Retention clip
Hardware Installation
Mounting the Feedback Option Module
Fit the spacers
(included in the
delivery) under the
board.
B
C
L
I
Hooks
B
C
Front
39