Sigma-5 and Sigma-7 Series SERVOPACKs
16.6
Storage Conditions
16.7
Recommissioning
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
1.
Make sure that the power has been disconnected and cannot be turned back on
accidentally.
2.
Disassemble the feedback module in the reverse order of the assembly (see Instal-
lation Guide).
Name
Σ-V Series and Σ-7 Series Feedback Option Module
Installation Guide
3.
Document the disassembly (or replacement) of the feedback module.
4.
Document the disassembly (or replacement) of the SERVOPACK, if applicable.
5.
Document the disassembly (or replacement) of the additional system components,
if applicable.
Store the feedback module in an adequate package with regard to the storage conditions
Ä Chap. 4.2.1 'General Specifications' page 30.
specified in
If you want to put the feedback module back into operation, observe the specifications
under
Ä Chap. 4.2.1 'General Specifications' page 30. Then follow the instructions in the
corresponding chapter on setting up the feedback module.
Disassembly and Storage
Recommissioning
Manual number
YEU TOEP C720829 03
111