Legend - YASKAWA SGDV-OFB03A Product Manual

Sigma-5 and Sigma-7 Series SERVOPACKs
Replacement Parts
Disposal
Customer Service
Terms Used
Trademarks
Certification

1.2 Legend

| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
The content of this publication has been prepared with care to ensure that it conforms to
the products described. As YASKAWA Europe GmbH is constantly striving to improve its
high-quality products, the information contained herein is subject to change without
notice.
We also cannot completely exclude deviations due to the further development of the
products described. However, the information contained herein is checked regularly and
necessary corrections are included in subsequent editions of this publication.
All rights reserved.
WARNING!
Improper or defective replacement parts can lead to damage, mal-
functions or total failure.
Therefore, procure and use only original replacement parts.
If you need a replacement for your product, please contact your authorized dealer.
Before disposing the product, destroy its functionality.
The marking of the product with the crossed-out wheeled bin symbol means that the
product should be sent to the recycling system at the end of its life. You should dispose of
it separately at an appropriate collection point and not put it in the normal waste stream.
See also Ä Chap. 17 'Disposal' page 112.
Our customer service is available for technical support.
Information on the competent contact person can be found at any time via telephone, fax,
E-mail or over the Internet.
A list of the terms and abbreviations used can be found in
Technical Terms' page 13.
Product names and company names are the trademarks or registered trademarks of the
respective company. "TM" and the ® mark do not appear with product or company names
in this manual.
The Feedback Option Module for Sigma-5-Series and Sigma-7-Series SERVOPACKs
from YASKAWA Europe GmbH has been developed in accordance with the standards
Ä Chap. 1.7 'Compliance with UL Standards, EU Directives, and Other
specified in
Safety Standards' page 15.
In operating manuals, instructions and notices draw the reader's attention to situations
that may result in personal injury or material damage if these instructions and notices are
not observed.
General
Legend
Ä Chap. 1.5 'Description of
7