Limitation Of Liability - YASKAWA SGDV-OFB03A Product Manual

Sigma-5 and Sigma-7 Series SERVOPACKs
Notation Used in this
Manual
Example

1.3 Limitation of Liability

General Information
Hardware
Software
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
Reverse Symbol Notation
In this manual, the names of reverse signals (ones that are valid when low) are written
with a forward slash (/) before the signal name, as shown in the following example:
The notation for is /BK.
Parameter Notation
The following two types of notations are used for parameter digit places and settings.
Example
Notation Example for Pn000
Pn000 = n. 0 0 0 0
Digit 1
Digit 2
Digit 3
Digit 4
All statements and instructions in this operating manual have been compiled in compli-
ance with the applicable standards and legislation while taking the current level of tech-
nology and our long-term experience and findings into account.
The actual scope of materials delivered can vary from the explanations and illustrations
described here in the event of custom designs, the use of additional ordering options or
due to the most recent changes in technology.
The user assumes the responsibility of conducting maintenance and commissioning in
accordance with the safety regulations of the applicable standards and all other relevant
national or regional legislation relating to conductor dimensioning and protection,
grounding, circuit breakers, overvoltage protection, etc.
The person who conducted the assembly or installation shall be accountable for damages
occurring during assembly or connection.
This operating manual, especially the safety instructions, must be observed during all
tasks performed with the product. In addition, all rules and regulations that are applicable
at the product's place of use must be observed.
Warranty and liability claims are excluded if they result from one or more of the following
causes:
n Non-compliance with this operating manual
n Improper use
n Deployment of untrained personnel (e.g. non ESD trained person)
n Use of non-approved replacement parts or accessories
n Non-permissible structural changes to the product
n Outside influences or acts of God
The software was developed with reference to technical programming standards and sub-
jected to extensive functional testing. However, the possibility of the program itself con-
taining errors or generating errors when interacting with other applications cannot be
excluded, nor possible limited functionality resulting from these errors.
Digit Notation
Meaning
Notation Method
Indicates digit 1
Pn000.0
of the parameter (Pn000).
Indicates digit 2
Pn000.1
of the parameter (Pn000).
Indicates digit 3
Pn000.2
of the parameter (Pn000).
Indicates digit 4
Pn000.3
of the parameter (Pn000).
General
Limitation of Liability
Set Value Notation
Notation Method Meaning
Indicates that digit 1 of the
Pn000.0 = x
or n.†††x parameter (Pn000) is x.
Indicates that digit 2 of the
Pn000.1 = x
or n.††x† parameter (Pn000) is x.
Indicates that digit 3 of the
Pn000.2 = x
or n.†x††
parameter (Pn000) is x.
Indicates that digit 4 of the
Pn000.3 = x
or n.x††† parameter (Pn000) is x.
9