Mutei -- Mute One Or More Inputs - Polycom Vortex EF2241 Programming Manual

B01MUTEGIM1 Mute all mic inputs.
B01MUTEGIM2 Toggle mute status of all mic inputs.
B01MUTEGIM? Query mute status of all mic inputs.

8.111. MUTEI -- Mute One or More Inputs

This command sets or queries the mute status of the analog inputs (1-4, A-D, T) .
This command is a channel boolean command. See
type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example
B01MUTEI41
B01MUTEIA0
B01MUTEIT2
B01MUTEIC?
B01MUTEI*1
Description
Mute input 4 .
Unmute input A .
Toggle mute status of input
T .
Query mute status of input
C .
Mute all inputs (1-4, A-D, T)
.
B01MUTEI11
B01MUTEI21
B01MUTEI31
B01MUTEI41
B01MUTEI1a
B01MUTEI2b
B01MUTEI3c
B01MUTEI4d ,
where a, b, c, and d reflect the mute status (0 or 1)
of each of the mic inputs. If this command was issued
after the example above, then the status messages
would be:
B01MUTEI10
B01MUTEI20
B01MUTEI30
B01MUTEI40 .
B01MUTEI1a
B01MUTEI2b
B01MUTEI3c
B01MUTEI4d ,
where a, b, c, and d reflect the mute status (0 or 1)
of each of the mic inputs. If this command was issued
after the example above, then the status messages
would be:
B01MUTEI10
B01MUTEI20
B01MUTEI30
B01MUTEI40 .
Section 6.3 and Section 6.1
Status Message
B01MUTEI41
B01MUTEIA0
B01MUTEITx , where x is either 0 or 1 depending
on the current mute status of the input.
B01MUTEICx , where x is either 0 or 1 depending
on the current mute status of the input.
B01MUTEI*111111111
for more information on this