Mini -- Enable Modem Initialization String; Ministr -- Set Modem Initialization String - Polycom Vortex EF2241 Programming Manual

Enable microphone gain stage for input
B01MIC*1
channels 1-4.
Toggle enabled status microphone gain
B01MIC*2
stage for input channels 1-4.
Query enabled status of microphone gain
B01MIC*?
stage for input channels 1-4.
Enable microphone gain stages for inputs
1-2 and disable microphone gain stages
B01MIC*1100
for inputs 3-4.

8.106. MINI -- Enable Modem Initialization String

This command controls whether or not the modem initialization string is sent at power-up. If MINI is 0, then
the modem initialization string is not sent. If MINI is 1, then the modem initialization string is sent. The text
of the modem initialization string is set via the
This command is a boolean command. See
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each
time it is changed. It will retain its value after power-down. Since this command writes to non-volatile
memory, there will be a delay before an acknowledgment is returned.
Example Description
B01MINI1 Enable modem initialization string.
B01MINI0 Disable modem initialization string.
Toggle enabled state of modem initialization
B01MINI2
string.
Query enabled state of modem initialization
B01MINI?
string.

8.107. MINISTR -- Set Modem Initialization String

This command is used to set or query the modem initialization string. The string can be a maximum of 32
characters long. The recommended modem initialization string for the Vortex is:
ATF1E0&B1S0=2
This can be set via the following command.
B01MINISTRATF1E0&B1S0=2
B01MIC*1111
B01MIC*abcd where a-d are each 0 or 1
depending on the current enabled state of the
microphone gain stage for the corresponding
input channel.
B01MIC*abcd where a-d are each 0 or 1
depending on the current enabled state of the
microphone gain stage for the corresponding
input channel.
B01MIC*1100
command.
MINISTR
Section 6.1 for more information on this type of command.
Status Message
B01MINI1
B01MINI0
B01MINIx , where x is 0 or 1 depending on
the current enabled state of the modem
initialization string.
B01MINIx , where x is 0 or 1 depending on
the current enabled state of the modem
initialization string.