Command Reference; Aa -- Enable Or Disable Auto Answer Mode - Polycom Vortex EF2241 Programming Manual

Global
PRESETW
-
PRESETX
-
REDIAL
Preset
REFASGN
Preset
REFGAIN
Preset
RING
Preset
SGGAIN
Preset
SGMUTE
Preset
SGTYPE
-
SOUNDL
-
SOUNDP
Preset
SSDELAY
Preset
SSEN
Preset
SSSTART
Preset
SSTEXT
-
SWRESET
-
SWVER
Preset
TONEE
Preset
TONER
Preset
VTXMODI
Preset
VTXMODO

8. Command Reference

8.1. AA -- Enable or Disable Auto Answer Mode

This command sets or queries the status of the auto answer feature.
This command is a boolean command. See
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
Enable auto answer mode. B01AA1
B01AA1
Disable auto answer mode. B01AA0
B01AA0
Toggle auto answer mode.
B01AA2
Save a Preset
Execute a Preset
Redial the Last Dialed Phone Number
Assign AEC Reference to Input Channel
Set Reference Output Gain
Enable or Disable Ring Messages
Set Gain of Signal Generator
Mute Signal Generator
Set Type of Signal Produced by Signal Generator
Play Sound Locally
Play Sound to Phone
Set Delay Between Screen Saver Screens
Enable or Disable Screen Saver
Set Idle Time Required for Screen Saver to Start
Set Text to be Displayed by Screen Saver
Perform Soft Reset of System
Query Software Version
Enable or Disable Entry and Exit Tones
Enable or Disable Ring Tones
Enable VTX Mode on Specified Inputs
Enable VTX Mode on Specified Inputs
Section 6.1
Status Message
B01AAx , where x is 0 or 1 depending on the current state of auto
answer mode.
for more information on this type of command.