Gaino -- Set Output Gain - Polycom Vortex EF2241 Programming Manual

This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example
B01GAINIT10
B01GAINIT?
B01GAINI*6
B01GAINI*ääääììììä
B01GAINI*?

8.61. GAINO -- Set Output Gain

This command sets or queries the gain (in dB) of the ten output channels (1-4, A-D, T, L) .
This command is a channel integer command. See
type of command. The minimum and maximum values for this command are -100 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example
B01GAINO210
B01GAINO2?
B01GAINO*6
Description Status Message
Set gain on
input T to 10
B01GAINIT10
dB.
Query the
F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx,
gain on where x is a number between 0 and 30, depending on the current
input T .
setting of the gain on input channel T .
Set gain on
all inputs (1-
B01GAINI*èèèèèèèèè
4, A-D, T) to
6 dB.
Set gain on
input
channels 1-4
and T to 0
B01GAINI*ääääììììä
dB and gain
on input
channels A-
D to 9 dB.
Query gain
B01GAINI*abcdefghi, where a-i are each between ä and ÿ,
on all inputs
depending on the current setting of the gains for each of the nine
(1-4, A-D, T)
input channels.
.
Description
Set gain on output
channel 2 to 10 dB.
Query the gain on output
channel 2 .
Set the gain on all output
channels (1-4, A-D, T, L)
to 6 dB.
Section 6.3 and Section 6.2
Status Message
B01GAINO210
B01GAINO2x, , where x is a number between -100
and 20, depending on the current setting of the gain
on output channel 2 .
B01GAINO*èèèèèèèèèè
for more information on this