Macroq -- Execute Macro Quietly; Macros -- Start A New Macro; Macrow -- Write Macro To Non-Volatile Memory - Polycom Vortex EF2241 Programming Manual

B01MACROA112,MUTEO*0
B01MACROW112
Once this macro has been defined, issuing the command:
B01MACROL112?
Will result in the following status messages:
B01MACROL112,MUTEI*0
B01MACROL112,GAINI*0
B01MACROL112,MUTEO*0
B01MACROL112

8.98. MACROQ -- Execute Macro Quietly

This command executes the macro corresponding to the specified number. The macro must have been
previously defined and stored in non-volatile memory via the MACROS, MACROA, and
the specified macro is empty, then an error condition of ERROR#070 will be generated.
When the MACROQ command executes, status messages for all of the commands in the macro will not be
generated. The MACROQ is provided so that a control system can execute a macro and not generate heavy
data traffic from the resulting status messages. Of course, this assumes that the control system is not
interested in any of the acknowledgements. The
without suppressing status messages.
Example Description
B01MACROQ125 Execute macro number 125 without generating any status messages.

8.99. MACROS -- Start a New Macro

This command is used to start writing a new macro with a specified macro number. This command is used in
conjunction with the
MACROA
another macro is in the process of being written (before the
progress will be deleted and the new one will be started.
See the description of the

8.100. MACROW -- Write Macro to Non-Volatile Memory

This command writes the macro that is currently being defined to non-volatile memory. This command is
used in conjunction with
macro is in progress (i.e., if a
command does not match the number of the macro in progress, then an error will be returned.
and commands to create a new macro. If this command is sent while
MACROW
command for detailed information on creating macros.
MACROA
and
MACROA MACROS
command has not been sent) or if the macro number sent with this
MACROS
command can be used to execute the macro
MACROX
MACROW
to create a new macro. If this command is sent when no
MACROW
Status Message
B01MACROQ125
command is sent), then the macro in
commands. If