Gateen -- Enable Automatic Gating Messages; Gmuteo -- Mute All Outputs - Polycom Vortex EF2241 Programming Manual

Example Description
Query gating status of microphone input
B01GATE3?
3 .
Query gating status of all microphone
B01GATE*?
inputs.

8.66. GATEEN -- Enable Automatic Gating Messages

This command controls whether or not gating information messages are sent automatically. If GATEEN is
enabled, then a GATE*? query is performed each time the gating status of any microphone changes. For
example, if no microphones are currently gated on and GATEEN is enabled, then if microphone input 3 gates
on, the following status message will be automatically generated:
B01GATE*0010
See the command for more information.
GATE
This command is a boolean command. See
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
B01GATEEN0 Disable automatic gating messages.
B01GATEEN1 Enable automatic gating messages.
Toggle enabled state of automatic gating
B01GATEEN2
messages.
Query enabled state of automatic gating
B01GATEEN?
messages.

8.67. GMUTEO -- Mute All Outputs

The name of this command is an abbreviation of "Global Mute Outputs." Enabling this option causes all of the
physical outputs to be muted (outputs 1-4, A-D, T, L) . This muting is independent of the normal output
mute command, MUTEO. This command is provided so that the control program can implement a "saftey
mute" feature. The idea is that if the user accidentally misconfigures the Vortex and feedback begins to
occur, they can press the saftey mute to instantly mute all outputs before they damage their equipment or
ears.
This command is a boolean command. See
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
Status Message
B01GATE3x , where x is 0 or 1 depending on
whether the input is gated off or gated on,
respectively.
B01GATE*abcd , where each letter (a, b, etc.) is
either 0 or 1 depending on whether the
corresponding microphone input is gated off or
gated on, respectively.
Section 6.1 for more information on this type of command.
Status Message
B01GATEEN0
B01GATEEN1
B01GATEENx , where x is either 0 or 1
depending on whether automatic gating
messages are currently disabled or enabled.
B01GATEENx , where x is either 0 or 1
depending on whether automatic gating
messages are currently disabled or enabled.
Section 6.1 for more information on this type of command.