Amchnum -- Set Chairman Mic For Specified Automixer - Polycom Vortex EF2241 Programming Manual

This command enables, disables, or queries the chairman mode feature for the specified automixer. The first
argument in the command specifies the automixer number (1 or 2) and the second argument specifies
whether chairman mode should be enabled, disabled, toggled, or queried.
If an AMCHAIR command requests that chairman mode be enabled, but the chairman microphone
(AMCHNUM) does not belong to the specified automixer, the AMCHAIR command will fail and return
ERROR#044. See the
information on dependencies within the automixer commands.
Even though this is a channel boolean command, use of the wildcard character for the automixer number is
not supported.
This command is a channel boolean command. See
type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
Disable chairman mode for Automixer 1
B01AMCHAIR10
.
Enable chairman mode for Automixer 2
B01AMCHAIR21
.
Query current setting of chairman
B01AMCHAIR2?
mode for Automixer 2 .

8.15. AMCHNUM -- Set Chairman Mic for Specified Automixer

This command sets the chairman microphone for the specified automixer. The first argument of the
command specifies the automixer number (1 or 2). The second argument specifies which microphone should
be the chairman microphone (1-4) for the automixer.
If chairman mode is enabled (AMCHAIR) and the AMCHNUM command tries to set a microphone number that
does not belong to the specified automixer, the command will fail and generate an ERROR#045. See the
command for more information on error messages. See
ERROR
dependencies within the automixer commands.
Even though this is a channel integer command, use of the wildcard character for the automixer number is
not supported.
This command is a channel integer command. See
type of command. The minimum and maximum values for this command are 1 and 4, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
command for more information on error messages. See
ERROR
Section 6.3 and Section 6.1
Status Message
B01AMCHAIR10
B01AMCHAIR21
B01AMCHAIR2x , where x is 0 or 1 depending
on the current setting of chairman mode for
Automixer 2 .
Section 3.5
Section 6.3 and Section 6.2
Status Message
Section 3.5
for more information on this
for more information on
for more information on this
for more