First-Time Operation; Table 5-2. Input Connector Pin Description; Figure 5-8. Input (Mains) Connector - Advanced Energy VarioMatch Match Network VM 1000 Platform User Manual

3
Advanced Energy ®
The AC input (Mains) connector is an IEC 320 connector.
power connector, and
2
Input (Mains) connector
Figure 5-8.
Table 5-2. Input connector pin description
Pin
1
Phase ( or neutral if pin 2 is
phase)
2 Neutral ( or phase if pin 1 is
neutral)
Ground
To Connect the AC Input Power:
Connect the V arioMatch match network to the power mains by connecting the AC
MAINS cord with your input power source (see
input voltage for your unit).
Note: The VarioMatch match network does not contain an on/off power switch. To
turn off the

FIRST-TIME OPERATION

&WARNING:
Maintenance personnel must receive proper training before installing,
troubleshooting, or maintaining high-energy electrical equipment.
Potentially lethal voltages could cause death, serious personal injury, or
damage to the equipment. Ensure that all appropriate safety precautions
are taken.
5-12
Table 5-2 describes each pin.
Description
unit you must completely disconnect the Mains.
Install ation, Setup, and Operation
Figure 5-8 shows the input
Chapter 3, "Specifications"
57020080-00D
for the