Reattaching The Top Cover And Reconnecting Power And Rf; Figure 5-21. Jumper Setting For Gamma Topology - Advanced Energy VarioMatch Match Network VM 1000 Platform User Manual

Figure 5-21. Jumper setting for Gamma topology

4. Replace the top cover of the metal box, carefully resoldering in place.
5. Replace the front panel by replacing the eleven screws.
REA TT ACHING THE TOP COVER AND RECONNECTING
POWER AND RF
To Reattach the Top Cover and Reconnect Power and RF:
1. Reattach the top cover:
a. Plug in the fan
b. Attach the top cover using the twelve screws you removed earlier.
2. Reconnect PLASMA/LOAD, RF-GENERATOR,
described in
57020080-00D
AE VarioMatch
Two jumpers on the right two posts for Gamma-topology
"Installing the VarioMatch Match Network" on page
Installation, Setup, and Operation
Match Network, VM 1000/1500 Platform
TM
and AC MAINS as
5-4.
5-35