Advanced Energy VarioMatch Match Network VM 1000 Platform User Manual page 95

For information to assist you in disconnecting the input power cable, see
"Connecting AC Input (Mains) Power'' on page 5-11.
3. Disconnect the RF input connector.
For information to assist you in this procedure, see
Generator" on page
4. Disconnect the PLASMA/LOAD connector.
For information to assist you in this procedure, see
page 5-9.
5. Disconnect the cooling hoses.
For information to
Water" on page
6. Drain the water.
Blow the lines out with compressed air. Clean dry air, CDA, is preferred.
Once you complete the above process, the V arioMatch match network is ready for
moving, storing, or other tasks requiring that the unit is purged of water.
57020080-00D
AE VarioMatch Match Network, VM 1000/1500 Platform
TM
5-8.
assist you in this procedure see
5-7.
Installation, Setup, and Operation
"Connecting RF Input From a
"Connecting to the Load" on
"Connecting the Cooling
5-39