Waybox Configuration; Configuration Of The "Supply System" Parameter - Enel X Waybox Pro Installer Manual

REV.2 - 03/2023

9 Waybox Configuration

NOTE:
The following steps do not require an active Internet connection on your smartphone.
1. Select CONFIGURATION to enter in the Way Box Configuration Menu;

9.1 Configuration of the "Supply System" Parameter

This configuration must be made in case of the installation of a three-phase Waybox on a
single-phase or bi-phase supply system.
1. Select the ADVANCED tab.
2. Select the Supply System tab.
3. Set the value to:
3.1 "Monophase" in case of Single-phase supply system.
3.2 "Biphase" in case of a Bi-phase supply system.
4. After performing the configuration click the SAVE button.
5. Click the REBOOT button.
80