Charging Test - Enel X Waybox Pro Installer Manual

11 Charging Test

Once the Waybox is installed, you can test your first charge via EV, if available.
It will be necessary to verify the operation of the station in the Connect&Charge and
UnlockToCharge modes and the actual maximum power configuration described in the
Waybox user manual.
NOTE:
If there is no Waybox connectivity, the allowed mode will be Connect&Charge.
The following table shows the tests to be performed in relation to whether there is any
connectivity or none.
Charging in Unlock To Charge mode,
with charging session started from Enel
X Way app
Charging in Unlock To Charge mode,
with charging session started from
RFID card (if RFID card available)
Charging in Connect&Charge mode
Verify that the charging session is
correctly recorded in the Enel X Way
app charging history
Checking Charging Power
Check correct operation in case of
Load Optimization Pro
WAYBOX
CONNECTED
X
X
X
X
X
X
REV.2 - 03/2023
WAYBOX NOT
CONNECTED
X
X
X
39