Charging In Unlock To Charge Mode - Enel X Waybox Pro Installer Manual

REV.2 - 03/2023

11.1 Charging in Unlock to Charge mode

This section describes how to charge a vehicle using the Waybox in Unlock To Charge mode,
using the Enel X Way app or an RFID card.
NOTE:
This mode is suggested when the Waybox is installed in areas with public access or for use
of the Scheduled Charging feature.
In Unlock To Charge mode, the Waybox charges only after recognizing an authorized user.
Charging sessions are then started and stopped using an authorized profile on the Enel X
Way App or an RFID card paired with the Waybox.
CHARGING USING THE ENEL X WAY APP
To start charging, open the Waybox section and TAP TO CHARGE.
Connect the vehicle within 90 seconds of unlocking.
Cable version: Connect the Waybox cable to the vehicle;
>
Socket version: Connect the charging cable to the socket on the Waybox and the vehicle.
>
Charging begins automatically. Once started, you can monitor the charging session on-
screen.
To stop charging select STOP CHARGING. Charging stops automatically and the charging
cable can be removed.
NOTE:
You can also stop charging sessions from the vehicle.
CHARGING USING AN RFID CARD (IF AVAILABLE)
The Enel X Way app card only allows you to start the Waybox charging session if:
the Waybox has been paired with the Enel X Way app account
>
the "Unlock to Charge" charging mode has been selected.
>
the Enel X Way app card has been paired with the Enel X Way app account.
>
To start charging, bring the card close to the Waybox RFID reader. Connect the vehicle
within 90 seconds of authorizing the RFID card:
40