Tools Needed - Enel X Waybox Pro Installer Manual

Gasket kit for single-phase Enel X Way
Waybox™ installation with 10 mm
section cables
Gasket 6 for PE
>
Gasket 2/6 for L1 and N/L2
>
Gasket kit for three-phase Waybox
installation with 10 mm
cables
Gasket 6 for PE
>
Gasket 4/6 for L1, L2, L3, N
>
Gasket for installation of connection cables
with control board (included only in versions
with control board)
Gasket 2/3
>

4 Tools Needed

>
Phillips screwdriver.
>
Flat screwdriver.
>
Pencil or marker.
>
Hex wrench size 4.
>
Wrench size 8.
>
Phillips screwdriver (dynamometric 1.3 Nm).
> Crimping tool.
> Wire stripper.
> Electrician's scissors.
> Silicone.
> Android smartphone (required for configuration tasks).
> Measuring tape and level.
For masonry or concrete buildings:
>
Hammer.
>
Drill bit for M8 wall plugs.
cross
2
cross section
2
REV.2 - 03/2023
13