Load Optimization Pro - Enel X Waybox Pro Installer Manual

9 Load Optimization Pro

NOTE:
The information in this paragraph, and the instructions in the linked manuals, should only
be considered if the Load Optimization Pro feature is scheduled to be activated for the
Customer. Only Waybox Pro and Waybox Pro Cellular allow Load Optimization Pro to be
activated.
This feature allows the Waybox to adapt its power level based on the consumption of
other devices connected to the same power line. In this way, it is possible to charge at the
maximum available power while avoiding the risk of triggering the meter.
The Waymeter device must be installed to use this feature. In the case of Waybox Plus and
Waybox Plus Cellular, since this feature is not available, the Waymeter device will not be
installed.
To install this device, please refer to the
procedure depending on whether the device is single-phase or three-phase.
Configuration tasks can be performed in one of the following ways:
Configuration of the Waybox and Waymeter through the "JB4Installers" smartphone app
>
(reserved for Enel X Way partners). To proceed with the configuration please refer to the
JB4Installers App Manual.
Configuration of the Waybox and Waymeter through the "Web Manager" Web App
>
(usable by all users). To proceed with the configuration please refer to the
Manual.
Waymeter Installation Manual
REV.2 - 03/2023
and follow the relevant
Web Manager
37