REV.2 - 03/2023
16. Place the base in the desired position at a height of at least 90 cm between the floor
and the bottom edge of the base. While holding the base steady, use the 4 mounting holes
as a guide to mark the points to be drilled in the wall.
17. Using an 8 mm drill bit, drill 50 mm deep holes in the previously marked locations on the
wall. Install the 4 wall plugs.
18. Use the screws and washers to install the base.
32
Need help?
Do you have a question about the Waybox Pro and is the answer not in the manual?