Figure3-18 Connecting an 8T1 cable
T1 / T1-F
Connecting a CE3/CT3/T3 cable
Overview
As a best practice, install a special lightning protector at the input end of the E3/T3 cables to protect
them against lightning strikes more efficiently when they are routed outdoors.
You can use an E3/T3 interface cable to connect the MIM-1CE3, MIM-1CT3, and MIM-1T3-V2
modules.
Figure3-19 E3/T3 cable
BNS
connector
Connecting a CE3/CT3/T3 cable
1.
Connect the SMB connector of an E3/T3 cable to the Tx port on the interface module and the
other end to the Rx port on the device to be connected.
2.
Connect the SMB connector of another E3/T3 cable to the Rx port of interface module and the
other end to the Tx port on the device to be connected.
Figure3-20 Connecting a CE3/CT3/T3 cable
CE3 / CT3
8T1 interface cable
E3/T3 cable
RX
TX
Device
(RJ45 Port)
TX
Device
(CE3 / CT3 )
RX
38
SMB
connector