Connecting A Ce3/Ct3/T3 Cable; Ce3/Ct3/T3 Cable Overview - H3C SR6604 Installation Manual

Connecting a T1 cable
Connect the D68 connector of the 8-port T1 cable to the D68 interface on the interface module
1.
and fasten the bolts to fix the cable.
The other end of the cable provides eight RJ-45 connectors. Connect them to the RJ-45
2.
interface on the remote device as needed.
Figure 56 Connecting an 8T1 cable

Connecting a CE3/CT3/T3 cable

CE3/CT3/T3 cable overview

You can use a CE3/CT3/T3 interface cable to connect the MIM-1CE3, MIM-1CT3, and MIM-1T3-V2
modules.
Figure 57 E3/T3 cable
As a best practice, install a special lightning protector at the input end of the E3/T3 cables to protect
them against lightning strikes more efficiently when they are routed outdoors.
Connecting a CE3/CT3/T3 cable
Connect the SMB connector of an E3/T3 cable to the Tx port on the interface module and the
1.
other end to the Rx port on the device to be connected.
Connect the SMB connector of another E3/T3 cable to the Rx port of interface module and the
2.
other end to the Tx port on the device to be connected.
46