Removing The Ventilation Plate; Removing The Ventilation Plate (Table Top Models) - Henny Penny ClassicCombi Operating Instructions Manual

Cleaning
Information regarding
operation with hard water

5.4.1 Removing the ventilation plate (table top models)

54
NOTICE
The unit can be used without softening the water up to a hardness of
5 °dH. However, water having a total hardness e xceeding 0 °dH contains
lime scale, which may form deposits in the cooking chamber.
The amount of lime scale deposited in the cooking chamber is nor mally
so low that it has no detrimental effect on the operation of the unit.
However, there may be white deposits in the cooking chamber.
The two-in-one cartridges contain a clear rinsing agent with descaling
properties, which usually pre vents these deposits from b uilding up if the
"WaveClean" automatic cleaning function is used regularly.
Clean daily with the "WaveClean extra" cleaning level, even if the
●
degree of soiling is low.
Use a clear rinse cartridge in addition to the cleaning cartridge.
●
Descale manually.
●

5.4 Removing the ventilation plate

The ventilation plate can be removed for cleaning.
CAUTION
Risk of crushing fingers due to rotating fan
→ Disconnect the unit from the power supply before you remove the
ventilation plate.
→ Do not operate the unit without the ventilation plate.
1. Remove the suspension frame on the left-hand side.
2. Open the front catch.
3. Fold the ventilation plate towards the rear wall.
4. Open the rear catch.
5. Slightly raise the ventilation plate and remove it.
6. Clean the cooking chamber behind the ventilation plate.
7. Push the ventilation plate onto the upper bolts.
8. Close the rear catch.
9. Fold the ventilation plate towards the side wall.
10. Close the front catch.
Operating instructions
ClassicCombi
Global Foodservice Solutions
™