Starting The Preheating Function; Activating Crisping Control (Optional) - Henny Penny ClassicCombi Operating Instructions Manual

ClassicCombi
0 15

4.9.3 Starting the preheating function

1 20 1 80
r d4

4.9.4 Activating Crisping control (optional)

d r4 1 00
Global Foodservice Solutions
™
4. Press S t a r t / St o p (5 ) to start the preset start time.
The LEDs light up for the button S t a r t / St o p (5 ).
Display (8) shows the remaining delay period.
Once the delay period has expired, the program that was set will be
started automatically.
NOTICE
The lighting in the cooking chamber is on during the delay period.
5. Press S t a r t / St o p (5 ) to cancel the preset start time.
The cooking chamber can be heated to the correct start temperature
with the function Preheat.
1. Set the cooking program.
2. Press Pr e h e a t (1 0 ) briefly: The cooking chamber will be heated
to a temperature 15 % higher than that of the first program step.
or
→ Press Pre h e a t (1 0 ) longer: The cooking chamber will be heated
to 275 °C (527 °F).
The P r e h e a t (1 0 ) LEDs flash.
The S ta r t / St o p ( 13 ) LEDs flash.
Display (9) shows the current temperature of the cooking chamber.
Display (8) shows the start temperature.
A signal sounds when the start temperature is reached.
Display (9) shows "rdY".
1. Press F L E X I ( 2 ) .
The key's LEDs are lit.
Display (9) shows "dry".
Display (8) shows "100".
2. Set the cooking chamber humidity with s e t bu t t o n ( 7 ).
3. Press F L E X I ( 2 ) .
The key's LEDs go out.
Display (9) shows the cooking temperature.
Operating instructions
Operation
41