Spraying Cleaning Solution; Let The Cleaner Work; Cleaning - Henny Penny ClassicCombi Operating Instructions Manual

Cleaning

- --
0 15

5.2.3 Spraying cleaning solution

S pR

5.2.4 Let the cleaner work

0 15
5.2.5 Cleaning
48
Display (8) shows "–:– –".
LEDs of the P r e h e a t (1 0 ) and S t a r t / St o p (5 ) buttons flash.
A signal sounds when the soaking temperature is reached; the soaking
program starts automatically.
Display (8) shows the remaining time.
CAUTION
Risk of burns due to caustic liquids
→ Wear protective clothing.
→ Also wear respiratory protection because of the f o rmation of aerosols
or mists.
After soaking, display (9) flashes "SPr" ( "Spray").
1. Open the cooking chamber door.
2. Spray cooking chamber, heating register and fan wheel (by opening
the ventilator plate) with cleaner.
CAUTION
Damage caused by exceeding the recommended reaction time
The surface of the cooking chamber may be damaged due to the
corrosive effects of the cleaner used.
→ Do not allow the cleaner to react f or longer than the per i od specified
by the program.
→ Close chamber door.
The reaction time starts.
The unit is inactive during the reaction time. The S t a r t / S t o p (5 ) LED
flashes.
Display (8) shows the remaining reaction time.
The cleaning process starts at the end of the reaction time.
Operating instructions
ClassicCombi
Global Foodservice Solutions
™