Removing And Attaching The Hygiene Plate - Henny Penny FlexFusion FSE-610 Installation Manual

Connecting the unit
6
Opening and closing the housing
6.1.3
22

Removing and attaching the hygiene plate

SAFETY INSTRUCTIONS
Risk of physical damage from squeezing the lines
a) When attaching the hygiene plate, make sure that wires are not
pinched.
NOTICE
Material damage caused by leaking hygiene plate
a) Check gaskets when attaching the hygiene plate.
b) Replace damaged gaskets.
c) Hygiene plate must lie around on the unit.
Removing hygiene plate
Removing hygiene plate
a) Loosen the screws on the rear panel.
b) Removing hygiene plate.
Attaching the hygiene plate
a) Put hygiene plate in place.
b) Screw in the screws on the rear panel.
c) Check that hygiene plate lies in place on all sides.