Basic Functions; Call Up Start Mode; Calling Up The Setup Menu And Changing Parameters - Henny Penny ClassicCombi Operating Instructions Manual

ClassicCombi

4.6.1 Call up start mode

Requirements

4.6.2 Calling up the setup menu and changing parameters

Requirements
C L
P Ar
P AS
1 11
6
Global Foodservice Solutions
™

4.6 Basic functions

Unit is switched on
The process of making entries for a program must first be ended in
order to be able to invoke other functions (e.g. setup menu).
→ Press St e p (1 3 ) for two seconds to end the entry of a cooking
program.
Unit is in start mode (standby).
The LEDs of the cooking mode buttons are lit.
Unit is switched on
Unit is in start mode (standby)
1. Press F L E X I ( 2 ) .
Display (9) flashes "CL" or "CLE".
2. Turn s e t bu t t o n (6 ) to select "PAr" ("Parameters").
3. Press S t a r t / St o p (5 ).
Display (9) shows "PAS" ( "Password").
0
Display (8) shows "0".
4. Turn s e t bu t t o n (7 ) to set the password "111".
5. Press S t a r t / St o p (5 ).
The setup menu has been opened.
Display (9) flashes the first parameter.
C
Display (8) shows the set value.
6. Turn s e t bu t t o n (6 ) to select other parameters.
7. Press S t a r t / St o p (5 ) to change parameters.
8. Turn s e t bu t t o n (7 ) to set a new value.
9. Press S t a r t / St o p (5 ) to adopt the changes and alter further
parameters.
Operating instructions
Operation
31