Starting A Multi-Step Cooking Program - Henny Penny ClassicCombi Operating Instructions Manual

ClassicCombi

4.7.2 Starting a multi-step cooking program

Requirements
1 80 1 15
S tP
Global Foodservice Solutions
™
9. Press the cooking mode button for the third cooking step.
The LEDs for the cooking mode button light up.
10. Set the cooking temperature.
11. Set the cooking time or target core temperature.
NOTICE
The cooking steps already entered can be checked by repeatedly
pressing St e p (1 3 ) .
Entering a multi-step cooking program
NOTICE
Multi-step cooking programs cannot be saved. Any changes made
are lost when the unit is switched off.
1. Press S t a r t / St o p (5 ) to start the cooking program.
LEDs for the button S t a r t / S t o p (5 ) flash until the last program step
is completed.
The St e p (1 3 ) LEDs are lit.
The LEDs of the cooking mode button for the active program step are
lit.
Display (9) shows the cooking temperature of the active program step.
Display (8) shows the cooking time or core temperature of the active
program step.
2. Press St e p (1 3 ) to show the number of the active program step.
Display (9) shows "StP" ( "Step") for five seconds.
Display (8) shows the number of the active program step for five
2
seconds.
3. After the last cooking step is completed, a signal sounds.
4. Press S t a r t / St o p (5 ) to start the cooking program again.
Operating instructions
Operation
37