Changing The Cooking Program During Operation; Setting The Cooking Temperature; Setting The Cooking Time - Henny Penny ClassicCombi Operating Instructions Manual

ClassicCombi

4.6.5 Changing the cooking program during operation

1 30 0 15

4.6.6 Setting the cooking temperature

1 30

4.6.7 Setting the cooking time

Global Foodservice Solutions
™
The LEDs for the cooking mode button are lit.
Display (9) shows the preset cooking temperature.
Display (8) shows the preset cooking time.
2. Press St a r t / St o p (5 ) or open the door of the chamber to tur n off
the signal.
The cooking time, cooking temperature or target core temperature can
be changed during operation.
NOTICE
Changes made during operation only apply to the running program
and are not adopted as default values.
1. Press St e p (1 3 ).
With multi-step cooking programs, press St e p (1 3 ) repeatedly
until display (8) shows the desired cooking step.
The LEDs for the cooking mode button are lit.
Display (9) flashes the set cooking temperature.
Display (8) flashes the set cooking time.
2. Turn s e t bu t t o n (6 ) to set the cooking temperature.
3. Turn s e t bu t t o n (7 ) clockwise to set the cooking time.
or
→ Turn s e t bu t t o n (7 ) anticlockwise to set the target core
temperature.
NOTICE
The preset values for each cooking mode can be adjusted individually .
→ Turn s e t bu t t o n (6 ).
Setting range 30 °C (86 °F)–250 °C (482 °F) in 1 °C (°F) increments .
NOTICE
Settings up to 9 hours 59 minutes in 1-minute increments, beyond
this in 10-minute increments.
Operating instructions
Operation
33