Test Alias Name, Device Path, -All Diagnostic - Sun Microsystems Ultra 80 Service Manual

CODE EXAMPLE 4-5
ok probe-scsi-all
/pci@1f,4000/scsi@3,1
/pci@1f,4000/scsi@3
Target 0
Unit 0
Target 1
Unit 0
Target 6
Unit 0
XM6201TASUN32XCD1103
ok
4.7.4

Test alias name, device path, -all Diagnostic

The test diagnostic, combined with a device alias or device path, enables a device
self-test program. If a device has no self-test program, the message:
No selftest method for device name is displayed.
To enable the self-test program for a device, type the test command followed by
the device alias or device path name.
The following code example identifies the test output message.
alias name selections, a description of the selection, and preparation.
Note – The diskette drive is selected as the test alias name example.
CODE EXAMPLE 4-6
ok test floppy
Testing floppy disk system. A formatted disk should be in the
drive.
Test succeeded.
Probe-SCSI-All Output Message
Disk SEAGATE ST34371W SUN4.2G7462
Disk SEAGATE ST19171W SUN9.0G0776
Removable Read Only device
Test Output Message
TOSHIBA
lists test
TABLE 4-6
Chapter -13