Aligned with
fan bracket
card guide
FIGURE 9-5
9.4.2
Replacing the UPA Graphics Card
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Replace the UPA graphics card as follows (
a. Position the UPA graphics card into the chassis.
b. Guide the card bracket tab into the chassis back-panel opening; guide the
opposite end of the card into the fan bracket card guide so that the card is
aligned evenly with the motherboard slot.
Screw
Removing and Replacing a UPA Graphics Card
Bracket tab
UPA card
):
FIGURE 9-5
Chapter
-11