Figure 6-1 System Power - Sun Microsystems Ultra 80 Service Manual

Note – If the system will not shut down, such as when the operating system has
crashed, press and hold the power switch for at least five seconds.
FIGURE 6-1
4. Verify the following:
a. The front panel LED is off.
b. The system fans are not spinning.
Caution – Disconnect the power cord prior to servicing system components.
5. Turn off the power to the monitor.
6. Disconnect cables to any peripheral equipment.
7. Remove the lock block, if installed (
-2 Sun Ultra 80 Service Manual • March 2000
System Power
Power switch
).
FIGURE 6-2