Figure 9-11 Setting The Memory Riser Assembly Thumbscrew Torque - Sun Microsystems Ultra 80 Service Manual

Torque-indicator driver
FIGURE 9-11
2. If necessary, replace the DC-to-DC converter.
See Section 7.3.2 "Replacing the DC-to-DC Converter Assembly" on page 7-9.
3. Detach the antistatic wrist strap.
4. Connect any external audio cables to the audio card.
5. Replace the access panel and power on the system.
See Section 6.3 "Replacing the Access Panel/Powering on the System" on page 6-6.
6. Verify proper operation.
See Section 3.5 "Maximum and Minimum Level of POST" on page 3-7.
-24 Sun Ultra 80 Service Manual • March 2000
Thumbscrew (2)
Setting the Memory Riser Assembly Thumbscrew Torque