Test <Alias Name>, <Device Path>, -All - Sun Microsystems Ultra 1 Creator Series Service Manual

CODE EXAMPLE 4-5
ok probe-scsi-all
This command may hang the system if
a Stop-A or halt command has been
executed. Please type reset-all to
reset the system before executing
this command.
Do you wish to continue? (y/n
ok probe-scsi-all
This command may hang the system if
a Stop-A or halt command has been
executed. Please type reset-all to
reset the system before executing
this command.
Do you wish to continue? (y/n)
/sbus@1f,0/SUNW, fas@e, 8800000
Target 0
Unit 0
Target 1
Unit 0
Target 6
Unit 0
4.6.4 test <Alias Name>, <Device Path>, -All
The test command, combined with a device alias or device path, enables a device
self-test program. If a device has no self-test program, the message:
No selftest method for <device name> is displayed. To enable the self-test
program for a device, enter the test command followed by the device alias or
4-12 Ultra 1 Creator Series Service Manual • August 1996
probe-scsi-all Output Message
Disk
Disk
Removable Read Only device
Enter n
Enter reset-all
Verify display blanks for
approximately 5 seconds
and returns to the ok
prompt.
Enter y
SEAGATE ST32550W
Sun2.1G041200000000
Copyright (c) 1995 Seagate
All rights reserved ASA2
SEAGATE ST32550W
Sun2.1G041200000000
Copyright (c) 1995 Seagate
All rights reserved ASA2
TOSHIBA XM-
5301TASUN4XCD173506/22/95