Test-All Command; Except Command - Sun Microsystems Sun Blade 150 Service Manual

CODE EXAMPLE 4-9
Testing /pci@1f,0/isa@7/dma@0,0/floppy@0,3f0 ........ passed
Hit any key to return to the main menu
4.7.4.2

Test-all Command

The test-all command executes the selftest of every device in the OpenBoot
Diagnostics menu.
Note – The OpenBoot Diagnostics test-all command is different than the POST
test-all command (used at the ok prompt). In OpenBoot Diagnostics, you cannot
specify a particular device path name and test all the children of that device.
4.7.4.3

Except Command

The except command allows the user to execute all tests except those tests which
the user specifies. The user specifies the device number of the test to be excluded.
Use commas to exclude more than one test.
CODE EXAMPLE 4-10
obdiag> except 1,4,5,6,8,10
Hit the spacebar to interrupt testing
Testing /pci@1f,0/ebus@c ..... ...................... passed
Testing /pci@1f,0/firewire@c,2 ...................... passed
Testing /pci@1f,0/network@c,1 ....................... passed
Testing /pci@1f,0/isa@7/serial@0,3f8 ................ passed
Hit any key to return to the main menu
4-14 Sun Blade 150 Service Manual • June 2002
Test Command (Continued)
Except Command