Replacing A Dimm; Figure 9-13 Removing And Replacing A Dimm (Sheet 2 Of 2) - Sun Microsystems Ultra 80 Service Manual

FIGURE 9-13
9.7.2

Replacing a DIMM

Caution – Do not remove any DIMM from the antistatic container until ready to
install it on the motherboard. Handle DIMMs only by their edges. Do not touch
DIMM components or metal parts. Always wear a grounding strap when handling
DIMMs.
Caution – For optimum memory performance, consider interleaving issues when
installing DIMMs. See Section C.1.5.2 "Interleaving" on page C-13.
Motherboard
Removing and Replacing a DIMM (Sheet 2 of 2)
DIMM
Double notch nearest
ejection lever
Chapter -27