Adjusting Position Of Stapler - Canon Finisher-AK1 Service Manual

5
Adjustment > Adjustment at Time of Parts Replacement > Adjusting Position of Stapler

Adjusting Position of Stapler

This adjustment is executed when replacing or installing/removing the Stapler in the
Intermediate Process Tray Assembly.
Adjusting method is as follows:
1) Put a marking [1] on the position of the stapler installed before replacing it.
2) Install the new stapler [2] with the marking position [1] aligned, and then secures the stapler
[2] with the 2 screws [3].
[1]
5 Adjustment > Adjustment at Time of Parts Replacement > Adjusting Position of Stapler
[3] [2]
F-5-64
5-28
5-28