Removing The Process Tray (Front) - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Process Tray (Front) > Procedure

Removing the Process Tray (Front)

■ Preparation
1) Remove the Stack Wall (Lower).(Refer to page 4-29)
2) Remove the Stack Wall (Upper).(Refer to page 4-27)
3) Remove the Neat Stack Unit (Lower).(Refer to page 4-59)
4) Remove the Process Tray Unit.(Refer to page 4-62)
■ Procedure
1) Remove the Process Tray Alignment Plate (Front) [1].
• 1 Screw [2]
• 1 Claw [3]
[1]
[3]
[2]
4 Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Process Tray (Front) > Procedure
2) Remove the Process Tray (Front) [1].
• 2 Screws [2]
• 1 Protrusion [3]
x2
F-4-161
[2]
[1]
[2]
4-68
[3]
F-4-162
4-68