< If connected to Document Insertion Unit >
7
Installation > Installation Procedure > Connecting the Cable
Wire Saddle
F-7-95
7
Installation > Installation Procedure > Connecting the Cable
7) Connect the Power Cord to the Finisher.
CAUTION: Note for Europe, Asia/Oceania Regions
The configuration of the connector varies depending on the country/region.
Use the correct power cord to match the location/area of installation.
Be sure to bring back the unused Power Cordes.
8) Connect the Power Plug of the Finisher to the outlet.
9) Turn ON the power in the order of the Finisher, then the host machine.
7-33
F-7-96
7-33