Canon Finisher-AK1 Service Manual page 110

4
Parts Replacing and Cleaning > Feed Assembly > Removing the Side Registration Shift Unit > Procedure
10) Remove the Side Registration Shift Unit [1].
• 2 Screws [2]
[1]
CAUTION:
When installing the Side Registration Unit [1], align the 2 holes [2] of the Side
Registration Shift Unit with 2 the Positioning Pins [3] of the Finisher Front Plate.
[3]
[2]
4 Parts Replacing and Cleaning > Feed Assembly > Removing the Side Registration Shift Unit > Procedure
[1]
[2]
[2]
F-4-112
[1]
F-4-113
CAUTION:
When connecting the connector [1] (Relay Connector) that was removed in step 8, be
sure to put it through the hole [A] of the Harness Guide [2].
[A]
4-52
[2]
[1]
F-4-114
4-52