Sensor - Canon Finisher-AK1 Service Manual

DIPSW(SW382)
1 2 3 4 5 6 7 8
- - On On On - On On M111 Saddle trailing edge
moving motor
- - On On On On - - M112 Saddle alignment
roller motor
- - On On On On - On M110 Saddle trailing edge
holding motor
- - On On On On On - -
- - On On On On On On SL3 "Saddle path switch
SL103 solenoid
SL104 Alignment roller
SL105 disengage solenoid
(upper)
Alignment roller
disengage solenoid
(lower)
Lead edge gripper
solenoid
"
- On - - On On On On - folding opration
6
Troubleshooting > Drive/Sensor check > Sensor
Name details
After pressing ENTER to start the
motor, use +/- to move in units of 20
mm in the range of 0 to 80 mm. Press
ENTER again to terminate the motor
(Home).
After pressing ENTER to start the
motor (665 mm/s), use +/- to switch
the speed (180 mm/s, 250 mm/s and
665 mm/s). Press ENTER again to
terminate the motor.
After pressing ENTER to start
the motor, use + (to engage)/- (to
disengage). Press ENTER again to
terminate the motor.
After pressing ENTER, initialization is
performed.
"After pressing ENTER, the solenoid
turns ON/OFF in the following order,
and then automatically terminates.
(1) Lower Path/Saddle Path Switch
Flapper (2) Alignment Roller Solenoid
(Upper) (3) Alignment Roller Solenoid
(Lower) (4) Leading Edge Gripper
Solenoid"
After pressing ENTER to start fold
operation , press + or -. Then, place
paper on the Saddle Unit. When
pressing -, stack processing starts.
Press ENTER to terminate the
operation (the size is A3).
6 Troubleshooting > Drive/Sensor check > Sensor

Sensor

DIPSW(SW382)
1 2 3 4 5 6 7
- On - On - - -
display
1 PS1 Front door sensor
2 PS2 Upper cover sensor
3 PS3 Inlet sensor
4 PS4 Shift unit trailing edge sensor
5 PS5 Upper delivery sensor
6 PS6 Lower delivery sensor
7 PS7 Horizontal registration detection unit HP
sensor
8 PS8 Shift roller unit HP sensor
9 PS9 Feed roller HP sensor
A UN22 Lower path sensor PCB
b PS43 Inlet roller HP sensor
DIPSW(SW382)
1 2 3 4 5 6 7
- On - On - - -
display
1 PS11 Front alignment HP sensor
2 PS12 Rear alignment HP sensor
3 PS13 Processing tray HP sensor
4 PS14 Stack delivery auxiliary tray HP sensor
5 PS15 Paper edge area sensor 1
6 PS16 Paper edge area sensor 2
7 PS17 Processing tray paper sensor
T-6-1
8 PS45 Delivery angle HP sensor
9 - -
A PS20 Paddle rotation HP sensor
8
-
T-6-2
Name Lit
Closed
Closed
Paper present
Paper present
Paper present
Paper present
HP
HP
HP
Paper present
HP
8
On
T-6-4
Name Lit
HP
HP
HP
HP
Detected
Detected
Paper present
HP
-
HP
6-6
Blinking
Open
Open
Paper absent
Paper absent
Paper absent
Paper absent
Other than HP
Other than HP
Other than HP
Paper absent
Other than HP
T-6-3
Blinking
Other than HP
Other than HP
Other than HP
Other than HP
Not detected
Not detected
Paper absent
Other than HP
-
Other than HP
T-6-5
6-6